POT PTFE BEARINGS
POT PTFE BEARINGS:
We are the famous manufacturers of POT PTFE BEARINGS which also includes the fixed pot bearings, sliding guided pot bearings and along with that free sliding pot bearing which have been launched for the first time in the South India at our plant in the state of Hyderabad. Our well known Pot Bearing design is actually based on the computation of the IRC : 83 (Part III) - 2002.
The key elements of a Pot Bearing is made up of a shallow cylinder, which is also known as a pot, an elastomeric pad which is known as a disc, and a single or set of sealing rings, along with a piston and also a variety of sliding surfaces. These kinds of Masonry plates and also the base plates are considered quite a common thing which is for the installation of these pot bearings, as they help facilitate the attachment of the bearings and also upsurge the support area on the pier and also on the abutment. Our Pot bearings are usually fixed against all kind of translation if not then they are generally used along with a PTFE sliding surface.
Pot and Piston
The pot bearings are always made up from the Structural Carbon steel and also with the aid of pistons which are generally made up from Stainless Steel. The sealing rings are usually the brass rings which are considered as the most dangerous component of these pot bearings for its extensive term services which are an exclusive and registered system which are followed by us.
In these Pot bearings, the vertical load is generally carried all the way through the piston of the pot bearing and is also resisted by the way of compressive strain in the elastomeric pad. The pad is also deformable but almost considered as incompressible and is every so often made as an ideal example as of having hydrostatically but in the real world it employs shear rigidity.